Wall vent cover · Finished in White
6 × 16 Wall Vent Cover
$191.00
Designed for a 6 × 16-inch wall duct opening, this metal wall vent cover features a powder-coated matte White finish, solid center panel, slim frame and perimeter airflow gap. Keep the supplied finish, or paint or wallpaper the visible face to coordinate with your wall.
- Duct opening
- 6 × 16 in
- Location
- Wall
- Shape
- Rectangular
- Finish
- White
Designed for your wall
A flat-face alternative to slatted wall vents.
Give a visible wall opening a simpler finish. The rectangular center panel keeps the face uncluttered, while the slim outer frame defines the edge. Air passes through the gap around the panel rather than through rows of exposed slats.
A metal cover with a framed, solid-center design.
Use the supplied White finish or coordinate the face with your wall.
The perimeter gap provides the opening for air to pass through.
Finish it your way
White, painted or wallpapered.
Keep the White finish as supplied, paint the visible face to coordinate with your wall, or carry a wallpaper pattern across the center panel.
Leave the gap around the panel clear when adding your finish. This product is supplied in White; paint and wallpaper finishes are applied after purchase.
Two-part drop-in design
How to install your wall vent cover
The outer body fits into the duct opening and is secured to the wall with 4 screws. Screws are not included.
Take the inner section out of the outer body to access the fixing points.
Position the outer body in the wall opening and fix it in place with 4 screws suitable for your wall.
Put the inner section back into the secured outer body. Keep the airflow gap around the panel clear.
Product details
Size and specifications.
The listed size refers to the wall duct opening, measured in inches—not the outside dimensions of the cover.
| Attributes | Value |
|---|---|
| Size | 6×16 |
| Finish | White |
| Material | Metal |
| Location | Wall |
| Shape | Rectangular |
| Face design | Solid center panel with slim outer frame |
| Airflow opening | Gap around the center panel |
| Customization | Paintable or wallpaperable |
| Coating | Powder-coated matte finish |
| Construction | Two-part body with removable inner section |
| Installation | Drop-in; outer body secured with 4 screws |
| Screws | 4 required; not included |
Before you order
Will this 6×16 wall vent cover fit?
Choose this size for a wall duct opening measuring 6 × 16 inches. Check the opening itself, not the face of the cover you are replacing.
Remove the existing cover when it is safe to do so. Measure the width and height from inside edge to inside edge.
Read the measuring guideFor an opening close to trim, cabinetry or a corner, contact us to confirm overall dimensions and mounting clearance before ordering.
If your measurements are different, compare the available wall vent cover sizes before choosing.
Wall vent cover questions
Answers before you order.
Does 6×16 mean the opening size or the outside size?
It means the duct-opening size: 6 × 16 inches, measured inside edge to inside edge. The frame extends beyond the opening, so check the available space around it as well.
Can I paint or wallpaper this wall vent cover?
Yes. The cover is supplied finished in White, and the visible face can be painted or wallpapered to coordinate with your room. Keep the perimeter airflow gap clear.
How does air pass through the solid-face design?
Air passes through the gap between the center panel and the outer frame. Keep this opening free of wallpaper, paint buildup and other obstructions.
What if my wall opening is not 6 × 16 inches?
Recheck both inside measurements and browse the wall vent cover collection for the matching size. For an unusual opening, send us your measurements and a photo before ordering.
Are mounting screws included?
No. You will need 4 screws suitable for your wall. Remove the inner section, secure the outer body in the opening with the screws, then reinstall the inner section.
Reviews
There are no reviews yet.